BSIS0 8636-2:2024 BSl Standards Publication Machine tools Test conditions for bridge-type milling machines Part 2: Testing of the accuracy of travelling bridge (gantry-type) machines bsi. BS IS0 8636-2:2024 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 8636-2:2024. It supersedes BS IS0 8636-2:2007, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MTE/1/2, Machine tools - Accuracy. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. @ The British Standards Institution 2024 Published by BSI Standards Limited 2024 ISBN 978 0539 181968 ICS 25.080.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2024. Amendments/corrigenda issued since publication Date Textaffected BS ISO 8636-2:2024 International ISO Standard IS08636-2 Third edition Machine tools Test conditions for 2024-09 bridge-type milling machines - Part 2: Testing of the accuracy of travelling bridge (gantry-type) machines Machines-outils - Conditions d'essai des machines a fraiser d portique Partie 2: Controle de I'exactitude des machines a portique mobile Reference number IS0 8636-2:2024(en) @ ISO 2024